TLT235SB Economical Floorplate Two Post Hydraulic Car Lift

two post hydraulic car lift 1.Lifting Capacity:3.5T 2.Liting Height:1950mm 3.Lifting time:50sec 4.Lowering time:40sec

TLT235SB Economical Floorplate Two Post Hydraulic Car Lift  

 Introduction:

 Economical Floor Plate Two Post Lift (Rated Capacity: 3.5Ton)

Feature:

 1.Dual hydraulic cylinders drive, stable lifting and lowering. Adopt two steel cables for equalization, force two carriages to move synchronously.2.Manual lock release mechanism on both sides3.Carraige travels in the column through slide blocks.

Specification:

Rated capacity(kg)	3500
Lifting height(mm):	1950
Lifting time(S):	50
Lowering time(S):	40
Motor power(kw):	2.2
Passage width(mm):	2486
Overall width(mm):	3370
Overall height(mm):	2860
Bottom clearance(mm):	110

Function Improvement

Item	Notes on Improvement	Update Date
Lock release plate assembly improvement on SB,SC series	The original lock release plate has the possibility of stucking in the column. The components dimension of the plate has been modified to avoid this problem.	2011-3-12
Limit switch position adjustable	The limit switch installed inside of the column wall and activated by the carriage will be fixed on an adapter plate with oval hole to make its position adjustable.(Notes:The limit switch is not a standard part,optional per user's request)	2011-1-30
Create a hole of 50 on both columns	In order to meet the after-service peoples requirement,there are two 50 holes on columns for lock release device reparing and maintenance( one hole on each column)	2010-12-13
The sheave seat of TLT235SB is changed from weld part to casting part	For decreasing the cost ,the sheave seat will be changed to casting part ,It will not effect the function of the machine.	2008-12-9
Unite the holes on the two-post lift	Unite the holes on the column to simplify the processing,It won,t effect the function of the machine.	2008-12-2
Changes of round rubber pad hole position	Add shims to the installation holes ,Bottom is flat ,add shims to 8 installation holes and flat washer 8	2008-6-27
M36 hexagon thick nut of support seat changed	Accord to the feedback,TLT235SB M36 hexagon thick nut of support seat change to the reguular chamfered edge style,the period of delivery is decreased.	2008-4-1
Changes of steel cable for safety lock for series TLT two lift	According to the customer requests ,we add some retaining rings on the rubber pad supporter in order to protect the cable of one side manual safety lock on AT not to slide off ,The carriage of flool-clear two-post lift can be installerd nore convenient	2007-11-26
Increase the shims to the carriage for series two-post lift	For well-adjust,the list of carriage (except TLT245ST SK2030)adds:TLT235SB shims I for sliding block(galvanization) ,Q235-A,TLT235SB-20-12-A,code:201010987,number:1	2007-11-5
Door rubber pad of 2-post lift have been changed	Door rubber pad reduce weight and add groove	2007-1-19
Processing changes for parts	Change being 1,Round plate adding welding outside zinc coating2,Push rod adding welding outside prcessing3,Screw adding outside processing	2007-1-18
Change of HP hose	The length of HP hose is changed form 1440mm to 1240mm	2006-12-19

TLT235SB Economical Floorplate Two Post Hydraulic Car Lift